 | Apeks Stainless Steel Backplate The backbone of any system - this cleverly designed back plate can be used
with the webbed harness or inserted into the WTX Harness. Made of 316 stainless
steel. Weighs approx 5 lbs (2.2 kg). 4 each upper and lower slots accommodate
nylon cylinder bands so a single cylinder can be strapped directly to the
plate. Having a series of 4 slots provides lateral stability of the cylinder
that traditional 2 slot plates cannot. 3 holes at the top of the plate offer a
range of height adjustments for the buoyancy cells and the cylinders. In
addition, a corresponding lower center slot allows for lower band bolts that
are misaligned. | £86.00 | |
 | Apeks One Piece Webbing Harness This simple, yet strong, harness can take the load of a fully rigged technical
diver. It can be easily customized with the hardware of your choice. 12’ of
solid 2” webbing with center grommet. 2”wide crotch strap. 6 stainless 2”
D-rings. Includes neoprene shoulder protectors. 2 elastic retaining loops on
shoulders and one on crotch strap. Heavy duty stainless waist buckle. 6
stainless serrated retainers. | £40.00 | |
 | Apeks Comfort Harness This is our most versatile harness. Solid construction coupled with durable
materials make this harness a cornerstone for many applications. Can mount
directly to a single cylinder using dual nylon cylinder bands. Can accept an
Apeks back plate for heavy loads such as twin steel cylinders. | £165.00 | |
 | Apeks WTX30 Single Cylinder Wing This single cylinder buoyancy cell can mate to the WTX Harness or directly to
the back plate. Gussets along each side allow for a full 32 lbs of lift without
compromising the overall size of the WTX3. 4 slots allow it to be mounted to a
WTX harness or back plate using and upper and lower nylon cylinder bands. 2
pairs of grommets allow the WTX3 to be bolted on if a single cylinder mounting
kit is used. | £124.00 | |
 | Apeks WTX40 Twinset Wing This is a new buoyancy cell in the WTX Series of floatation products. The WTX4
is a smaller version of the WTX6 & WTX8 but it can accept single cylinders too!
The WTX4 can mate directly to the WTX harness or the stainless steel back plate
using twin tank bands or using center bolts. | £152.00 | |
 | Apeks WTX60 Twinset Wing Outer bag constructed out of Armorshield™ Cordura to resist abrasion and
fading. Inner bag constructed from mil-spec welded fabric. This is the same
fabric used in survival vests worn by US fighter pilots. Inner bladder
protected from zipper with V-diamond rubber. Pull dump on inside lower left
Optional pull dump may be added to inside lower right Highly efficient drains
empty water quickly after the dive. 3 upper grommets allow various height
settings coupled with a lower slot that compensates for misaligned band bolts. | £161.00 | |
 | NAS Backplate The Nas backplate is specially designed to take the custom made NAS harness
with its quick release system. It is laser cut and then countersunk and
de-burred. Finally it is highly polished to leave a shining finish The
backplate comes with addditional slots which can optionally be used with the
NAS single tank adapter for added strength. This custom designed back plate is
manufacturered out of 3mm 316 stainless steel. | £85.00 | |
 | NAS Harness A fully adjustable harness system with safety straps. Fully ajustable and one
size fits all. Comes with a stainless steel buckle and Two 6 inch safety straps
are included with the harness that can be attached to the webbing, for extra
safety these lay under both plastic buckles on either side, in case of the
buckle breaking or becoming damaged | £40.00 | |
| NAS Backplate with Harness System NAS backplate and fully adjustable harness. Two 6 inch safety straps are
included with the harness that can be attached to the webbing, for extra safety
these lay under both plastic buckles on either side, in case of the buckle
breaking or becoming damaged. Fully adjustable and one size fits all. This
custom designed back plate is manufacturered out of 3mm 316 stainless steel,
laser cut and then countersunk, de-burred and highly polished to leave a
shining finish and the harness is made using polypropylene webbing. | £150.00 | |
 | NAS Backplate Pouch The pouch pads the back plate and not only provides comfort on the divers back
helping with stress caused by carrying heavy twin sets or multiple cylinder
diving. The pouch also secures an emergency SMB or lifting bag and can be
accessed by the top by a buddy by pulling the webbed tab or by the diver them
selves by the bottom of the pouch. The pouch has four brass eyelets and comes
with plastic clips and can be fitted to the back plate in less then a minute | £40.00 | |
| | | |
